Drifter Pro

Surfing Foilboard.

Silky.

Drifter Pro
Surfing Foilboard

Keith Teboul: “Foiling is one of the most exciting things I have ever done in the water. In general you can ride smaller volumes than you would in surfing. I now ride 27 liters surfing but with foiling I use 24 liters. The foil helps keep the board very stable when you are paddling so it doesn’t feel small.

The Drifter Pro has a completely flat rocker where the foil is attached. The foil is at 90 degrees to the board. When foiling it creates neutral lift. These boards have a nice entry for bouncing off the water and beveled rails to bounce off when you are in turns and hit the water. The tail bevel acts the same, allowing you to ride a longer board and yet the board will not touch down in the tail and hit as quickly. The boards also have a concave deck with a kick tail that acts as a skateboard tail in that you have something to push off of when turning. It also puts your back knee in a better position to foil.

I would suggest putting the foil centered to start and move it back if you want less lift, and forward if you want more lift. For smaller waves move the foil forward, for bigger waves move it back.”

ISS, Integrated Stringer System: Dual Futures 10.75” finboxes tie directly into high density foam stringers, seamlessly connecting the base of the mast with the board, tail to nose, so wherever you step, you’re good to go, and so is your board.

TwinpairTM Carbon Exoskeleton: Literally working in melted conjunction with the ISS, these dual carbon strips finish off the highest grade flex control we’re giving these foil boards. There’s no wobbeling, no lag, no softness. These boards are as crisp and direct as it gets. Designed and engineered specifically for foilboarding, this Pro construction reflects our undivided dedication to the discipline.

Pro TwinpairTM Carbon Exoskeleton Construction.

Available in 4’10”, 5’0”, 5’5”, 5’10”.

Futures 10.75” White 1-Shot Foil Boxes.

Available in white & red.

Drifter Pro

Surfing Foilboard.

5’5” Model
Drifter Pro by Bjoern

Construction

Pro Hydrofoil Surfing

ISS, Integrated Stringer System. The dual finboxes of the foil tie directly into these high density foam stringers, seamlessly connecting the base of the mast with your stance and the board, tail to nose, so wherever you step, you’re good to go, and so is your board.

TwinpairTM Carbon Exoskeleton. Literally working in melted conjunction with the ISS, these dual carbon strips finish off the highest grade flex control we’re giving these foil boards. There’s no wobbeling, no lag, no softness. These boards are as crisp and direct and modern as it gets.

MFC Deckpads. The Drifter Pro comes with a deckpad made up of a super grippy tail pad incl. kick, a light mid section, as well as a front section for excellent hold and drive throughout your every move.

Specs

2020_board_drifter_specs

Drifter Pro

Surfing Foilboard.

5’5” Model
Drifter Pro by Bjoern

Drifter Pro

Surfing Foilboard.

5’5” Model
Drifter Pro by Bjoern

Drifter Pro

Surfing Foilboard.

5’5” Model
Drifter Pro by Bjoern

Drifter Pro

Surfing Foilboard.

5’5” Model
Drifter Pro by Bjoern

Drifter Pro

Surfing Foilboard.

5’5” Model
Drifter Pro by Bjoern

Feedback

Share your opinion

The space below is yours to share your thoughts. Find existing reviews below. Asterisks denote required fields.

Rating*
 

 

Drifter Pro SKU UPC Model
Max, Hawaii  
Jan 19, 2023 

Not a review exactly but looking to see if you have any MFC small foil board traction pads available? They're sold out on their site and I thought you might have in stock or possibly know someone on Oahu with some? Best traction I've ever used. I know why you run them on your boards!

Mahalo

Max

5.0 5.0 1 1 Not a review exactly but looking to see if you have any MFC small foil board traction pads available? They're sold out on their site and I thought you might have in stock or possib Drifter Pro

Please contact us for shipping rates.
Copyright © Forward Maui Inc. All rights reserved.